06-10-2015 09:29 AM - edited 03-08-2019 12:29 AM
Hai
Is it possible to connect GLC SX MM 1G to a core with X2 10 G SR .
ALSO SFP 10 G SR to X2 10 G SR
Consider all multi mode.
Thanks
06-10-2015 09:35 AM
Vijay,
Please find the compatibility matrix for the GLX :-
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html
HTH
Regards
Inayath
*Please rate if this is helpfull.
06-10-2015 11:16 PM
Dear All
Thanks for reply.
Is it possible to connect 4500x with sfp plus
10g. To x2 10 G on core.
Both multimode fiber
06-10-2015 11:28 PM
ain features of Cisco 10GBASE SFP+ modules include:
● Smallest 10G form factor
● Commercial temperature (0 to 70°C) only
● Supports 10GBASE Ethernet only
● Hot-swappable input/output device that plugs in to an Ethernet SFP+ port of Cisco platforms
● Provides flexibility of interface choice
● Supports digital optical monitoring capability
● Cisco quality identification (ID) feature that enables a Cisco platform to identify - optics supported by Cisco technology
● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
06-10-2015 09:49 AM
Hi no you cannot interconnect these transceivers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide