cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
328
Views
0
Helpful
1
Replies

show users : users never expired

Kyujin Choi
Level 1
Level 1

Basically, I couldn't access one of switch, so I accessed through console and found out 15 vty users logged in.

So, I cleared all vty users which are all my sessions. clear line vty #

And I adjust exec-timeout option to automatically kill the sessions.

My quesiton is how come switch remembers all session even though I logged out (or turned off my PC).

Thanks for your input.

1 Accepted Solution

Accepted Solutions

acampbell
VIP Alumni
VIP Alumni

Hi,

Hung telnet sessions

Try adding the following to your global configs :-

!

no service udp-small-servers

no service tcp-small-servers

service tcp-keepalives-in

service tcp-keepalives-out

!

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a00801365f3.shtml

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

View solution in original post

1 Reply 1

acampbell
VIP Alumni
VIP Alumni

Hi,

Hung telnet sessions

Try adding the following to your global configs :-

!

no service udp-small-servers

no service tcp-small-servers

service tcp-keepalives-in

service tcp-keepalives-out

!

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a00801365f3.shtml

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
Review Cisco Networking for a $25 gift card