02-26-2024 10:47 AM
In a mixed 9300L/9300LM stack, is Stack-T3A cable compatible with C9300L-STACK-KIT connector?
Conversely, is Stack-T3 cable compatible with C9300L-STACK-KIT2 connector?
02-26-2024 01:45 PM
For 9300 fixed uplink models, stack kit is mandatory for StackWise-320 and has to be ordered separately. Each stack kit consists of two stack adapters and one data stack cable.
check below guide :
02-26-2024 02:07 PM
It appears to be compatible. See table-2 in this link:
HTH
02-26-2024 02:20 PM
I read that guide. Should be compatible...but looking at the rear panel drawings shown in Cisco Catalyst 9300 Series Switches Hardware Installation Guide - Product Overview [Cisco Catalyst 9300 Series Switches] - Cisco, the StackWise-320 ports looks different in 9300L (figure 11) and 9300LM (figure 12).
09-06-2024 10:04 AM
I received an 9300LM and can say that the connectors are mechanically incompatible.
Stack-T3A cable will NOT plug into C9300L-STACK-KIT adapter port, and STACK-T3 cable will not plug into C9300L-STACK-KIT2 adapter port.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide