Stacked WS-C3850's Modules

[Matt Conley]

I’ve got a and a WS-C3850-24T & WS-C3850-12XS Stacked.  I want to put a C3850-NM-2-10G module in the 24T and a C3850-NM-4-10G module in the 12XS.  I then want to link to a C9404R which will be the new core.  Want to etherchannel the 2 10G ports on the 24T module and 2 10TG ports on the XS module to the C9404R’s 40G using a breakout cable.  Will this work? 

[balaji.bandi]

Look at the compatability matrix table :

https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/TMG_CM_Tool_User_Manual.html

[Matt Conley]

Thanks I understand that the modules themselves are supported on the each of the switches... I'm interested in knowing if the design will work.  Specifically, if the the expansion modules on the two switches, being different will work.