Stackwise Configuration best practice

[znaqvi@intervision.com]

I'm currently converting single 3560G Access switch with 2 x 2960X switches with Stackwise cable.

Uplink to the distribution switch will remain same which will be connected to a single 2960X.

Can someone tell me the migration best practice from 3560G to 2x2960X?

[Leo Laohoo · Accepted solution]

Copy the config and paste it to the 2960X.

[znaqvi@intervision.com]

So copy the configuration from 3650G and past the same configuration to both 2960's ?

[Leo Laohoo]

Correct. Make sure you change the interface details. The 3560 uses "Gi0/<PORT>" while the 2960 stacked uses "Gi <SLOT>/0/<PORT>".