Hi,
our pair of Nexus7000 are configured with RSTP.
On the Edge-Switches we have seen an STP topology change in all connected vlans.
On N7k the topology has also changed what we`ve only seen in the output of the stp details
sh spanning-tree vlan 46 detail
VLAN0046 is executing the rstp compatible Spanning Tree protocol
Bridge Identifier has priority 8192, sysid 46, address 0023.04ee.be01
Configured hello time 2, max age 20, forward delay 15
We are the root of the spanning tree
Topology change flag not set, detected flag not set
Number of topology changes 292 last change occurred 145:31:18 ago
from port-channel252
Times: hold 1, topology change 35, notification 2
hello 2, max age 20, forward delay 15
Timers: hello 0, topology change 0, notification 0
I like to configure a logging for topology changes, but i havn't found a command.
Is there an opportunity to get this logging-messages on n7k?
Kind regards
Andreas
