SVI interface vs Default-Gateway

[Patrick McHenry]

Hi,

I was wondering if anyone has had experience with this:

If an SVI is configured as the gateway for a VLAN and in that same subnet is a config for a default-gateway address on that switch, can this cause confusion for the layer 3 switch in any way? Or, would the SVI override any dafault-gateway config?

L3Sswitch#sh ip int br

Vlan301                10.1.1.1        YES manual up                    up

!

!

!

!

Also,

L3Switchsh run | i defaul

ip default-gateway 10.1.1.2

Thanks, Pat.

[cadet alain · Accepted solution]

Hi,

the IP default-gateway will only be used when switch L2 only so when ip routing is disabled otherwise it will use the default route.

Regards.

Alain

Don't forget to rate helpful posts.

[Patrick McHenry]

Thanks, Alain - do you live on these pages?

[cadet alain]

Hi,

yes , they are rather cosy 

Regards.

Alain

Don't forget to rate helpful posts.