06-05-2022 09:29 AM
Hi all,
what are the supported transceiver modules with C9300X-12Y-E switch,
Does it come with fixed ports or we need to purchase SFP modules?
if needed, what are the supported transceiver modules with C9300X-12Y-E switch?
06-05-2022 09:54 AM
Hi,
According to the datasheet, you would need to purchase the uplink module. It does not come with it by default.
see table-3 in this link for the supported modules:
C9300X-12Y-E |
Catalyst 9300 12-port 25G/10G/1G SFP28 with modular uplinks, Network Essentials |
06-05-2022 10:13 AM - edited 06-05-2022 10:13 AM
Try this : https://tmgmatrix.cisco.com/?npid=4301
lots of options for modules depending on the speed and reach you need.
06-05-2022 05:28 PM
@Eman.Bakri wrote:
C9300X-12Y
Model has 12 optical ports and will support 1-, 10- and 25 Gbps optics. Modular uplinks is an optional purchase.
IMPORTANT: Because this is a 9300X, the modular uplink must be an "X" or it will not work. Non-X modular uplinks will not work on 9300X-specific model. This is by design.
@Eman.Bakri wrote:
what are the supported transceiver modules with C9300X-12Y-E switch?
Depends on many factors, such as:
06-06-2023 04:23 AM
I have the same need to understand SFP right model for C9300X-12Y-E, on-board optics, Cisco branded. We have to implement fiber optics OM4 link 1/10 Gbps. I have found "SFP-10/25G-CSR-S", that works at 10/25 Gbps, could it be the right one ? What if I need just 1/10 Gbps ? Could SFP-10G-SR= be the right choose ?
06-06-2023 04:45 PM
@giuseppe.tetti1 wrote:
What if I need just 1/10 Gbps ? Could SFP-10G-SR= be the right choose ?
It depends because SFP-10G-SR will only work on 10 Gbps, short-reach. If the handover is a 1 Gbps link, then the correct optics should correspond, like GLC-SX-MMD (for 1 Gbps application).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide