12-24-2014 07:35 PM - edited 03-07-2019 10:00 PM
2014-12-24 02:46:37 Local0.Alert 10.73.254.2 79: 3d19h: %L3_ASIC-SP-STDBY-1-ERR_NF_PARITY: Netflow table parity error can't be fixed by software. Host: 10.73.254.2 IP Address: 10.73.254.2 To determine the hostname of this device, run the following command in Windows Command Prompt: nslookup 10.73.254.2
I recently received the following syslog error from my 6506.
I tried looking this up, but failed to discover what the error is trying to tell me or what I need to correct it.
Can anyone tell me what this error message means?
As always, all comments, suggestions, opinions and flames are welcome.
Bryan Smith
Solved! Go to Solution.
12-24-2014 08:35 PM
Here is the recommend action to take when seeing this error message:
Error Message %L3_ASIC-1-ERR_NF_PARITY: Netflow table parity error can't be fixed by
software.
Explanation NetFlow table parity errors are too many to be fixed by software.
Recommended Action Reload the system. If the messages continue for the same module after a reload, contact your Cisco technical support representative and provide the output of the show module command to obtain a replacement for that module.
here is the link:
http://www.cisco.com/c/en/us/td/docs/ios/12_2sx/system/messages/122sxsms/sm2sx05.html#wp1080973
HTH
12-24-2014 08:35 PM
Here is the recommend action to take when seeing this error message:
Error Message %L3_ASIC-1-ERR_NF_PARITY: Netflow table parity error can't be fixed by
software.
Explanation NetFlow table parity errors are too many to be fixed by software.
Recommended Action Reload the system. If the messages continue for the same module after a reload, contact your Cisco technical support representative and provide the output of the show module command to obtain a replacement for that module.
here is the link:
http://www.cisco.com/c/en/us/td/docs/ios/12_2sx/system/messages/122sxsms/sm2sx05.html#wp1080973
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide