04-24-2019 12:05 AM
Hello,
I want to update a switch and it's flash has lots config files, I guess because of crashes, but I'm not sure. See photo.
Also the firmware seems to be an EX3 file what is this?
Space free is:
122185728 bytes total (98291200 bytes free)
Any advise would be great.
Thanks
04-24-2019 12:15 AM
04-24-2019 12:17 AM
04-24-2019 01:22 AM
Firmware downloaded and not uploading to switch I guess I just use the boot image command?
I see this in the config:
archive
log config
logging enable
logging size 200
notify syslog contenttype plaintext
hidekeys
path flash:/$t-$h-config
write-memory
time-period 1440
And yes I can open the configs.
I'm confused why I'm downloading a .bin file while the one on the switch is .EX3?
04-24-2019 01:39 AM
04-24-2019 12:25 AM
Hi there,
Looks like you have the config archive enabled on the switch, but with the path set to the local flash instead of to a remote server. What is the output of sh archive
The EX in the filename normally denotes a special release. If you are looking to upgrade you should go for 15.2.4E7
cheers,
Seb.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide