Greetings!
I have a Cisco 1801W router, running a DSL connection with wireless connectivity for a school.
This is configured on the fastEthernet0 interface on the 192.168.1.0 network (the router is 192.168.1.1).
I was wondering if it is possible to get the built-in switch (fastEthernet 1-8 interfaces) to be used as a part of the same network (192.168.1.0/24).
Is that possible?
If so, does anyone have any sample configurations for this?
Fastethernet0 is connected to the school's main switch (24 port), but we could use a few more ports. I'd love to use the 8 ports on the router.
Thanks,
Bill
