06-06-2018 01:55 AM - edited 03-08-2019 03:16 PM
Hello everyone
I have an issue that PRTG not read traffic for vlan
in nexus it stay to zero value
when i
sh interface vlan 73 counters
--------------------------------------------------------------------------------
Port InOctets InUcastPkts
--------------------------------------------------------------------------------
Vlan73 -- 0
--------------------------------------------------------------------------------
Port InMcastPkts InBcastPkts
--------------------------------------------------------------------------------
Vlan73 -- --
--------------------------------------------------------------------------------
Port OutOctets OutUcastPkts
--------------------------------------------------------------------------------
Vlan73 -- --
--------------------------------------------------------------------------------
Port OutMcastPkts OutBcastPkts
--------------------------------------------------------------------------------
Vlan73 -- --
but its working for physical interface
sh interface Eth1/73 counters
--------------------------------------------------------------------------------
Port InOctets InUcastPkts
--------------------------------------------------------------------------------
Eth1/73 7781246573492550 7573375109017
--------------------------------------------------------------------------------
Port InMcastPkts InBcastPkts
--------------------------------------------------------------------------------
Eth1/73 472176 425926
--------------------------------------------------------------------------------
Port OutOctets OutUcastPkts
--------------------------------------------------------------------------------
Eth1/73 780890066255691 3575755128641
--------------------------------------------------------------------------------
Port OutMcastPkts OutBcastPkts
--------------------------------------------------------------------------------
Eth1/73 17956424 12651
is there any solution for this issue ... thanks
06-06-2018 06:56 AM
Hi,
You may want to check with your vendor, but I think that is the normal behavior with most monitoring applications where they can pull the physical interfaces but not vlans.
HTH
06-07-2018 12:24 AM
hi and thanks for replay
i am asking if there is a trick like this command in cisco-ios
interfaace vlan 10
counter ipv4
to activate vlan counter ...
06-09-2018 09:38 AM
Hi,
Unfortunately the Nexus 3000 series do not support SVI (interface VLAN) statistics in certain versions of code hence why the counter appears as zero in your outputs - This cannot be modified with any configuration also in these affected versions.
This behavior is documented in CSCve41919 -The SVI statistics capability was added on 7.0(3)I6(2), 7.0(3)I7(1) and the BU golden release of 7.0(3)I4(7).
Hope that helps!
06-10-2018 12:54 AM
thank you Dear
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide