Vstack director configuration. error configuration

[carlos0034]

 I have the following error regarding my Vstack director configuration.

if someone can help me to fix it. I'll so much appreciated.

Director IOS: System image file is "flash:/c3750e-ipbasek9-mz.150-2.SE10a.bin

 Client  WS-C2960G-48TC-LIOS: c2960-lanbase-mz.122-35.SE5.bin 

Switch#show vstack config
Role: Director (SmartInstall enabled)
Vstack Director IP address: 10.10.10.10
Vstack Mode: Basic
Vstack default management vlan: 1
Vstack start-up management vlan: 1
Vstack management Vlans: 1
Vstack Image file: tftp://10.10.10.2/c2960-lanbasek9-tar.150-2.SE6.tar
Join Window Details:
Window: Open (default)
Operation Mode: auto (default)
Vstack Backup Details:
Mode: On (default)
Repository: flash:/vstack (default)
Switch#

Switch#show vstack status
Code :
HOP 0 : Director HOP N : Nth Hop in the Network
HOP ** : Reachability Unknown / Unreachable
Director Database :
MAC Address Product-ID IP_addr DevID HOP
============== ================= =============== =============== =====
d057.4c18.0280 WS-C3750E-48TD 10.10.10.10 Switch 0
000e.39bd.1c00 7301 10.10.10.1 Router 1
001f.2732.9500 WS-C2960G-48TC-L 10.10.10.4 Switch 1

Switch#show vstack group custom BSO detail
-----------------------------------------------
Group Name: BSO
Image: tftp://10.10.10.2/c3750e-ipbasek9-mz.150-2.SE10a..tar
Config File: tftp://10.10.10.2/client_cfg.txt
Product-ID: ws-C2960-48TC-L
Switch#

Switch#show vstack group built-in 2960g 48 detail
---------------------------------------------
Group Name: 2960G 48
Image Name: tftp://10.10.10.2/c3750e-ipbasek9-mz.150-2.SE10a.tar
Config file name: tftp://10.10.10.2/client_cfg.txt

Switch#

Switch#show vstack download-status
SmartInstall: ENABLED
Total no of entries : 2
No client-IP client-MAC Method Image-status Config-status
=== =============== ============== ============== ============ =============
1 10.10.10.1 0000.0000.0000 zero-touch NOT STARTED NOT STARTED
2 10.10.10.3 0000.0000.0000 zero-touch FAILED NOT STARTED

Switch#

[Leo Laohoo]

Console into the client/slave and reboot.  I want to see exactly what the client is doing. 

[carlos0034]

 Leo

  The client switch is factory default there is no configuration on it.

   the director is 3750-e 

*******************************************************

Switch#show vstack config
Role: Director (SmartInstall enabled)
Vstack Director IP address: 10.10.10.10
Vstack Mode: Basic
Vstack default management vlan: 1
Vstack start-up management vlan: 1
Vstack management Vlans: 1
Vstack Image file: tftp://10.10.10.2/c2960-lanbasek9-tar.150-2.SE6.tar
Join Window Details:
Window: Open (default)
Operation Mode: auto (default)
Vstack Backup Details:
Mode: On (default)
Repository: flash:/vstack (default)
Switch#

from the director I have the following message:

*Jan 2 00:05:29.689: %SMI-6-SWITCH_ADD: New Device detected by Director with mac address: 001f.2732.9500

Here is the Error

!! smi_tftp_image_list_to_tftp_server: tftp://10.10.10.2/default_imglist.txt Image List Transfer failed!

Switch#show vstack group custom BSO detail
-----------------------------------------------
Group Name: BSO
Image: tftp://10.10.10.3/c2960-lanbasek9-tar.150-2.SE6.tar
Config File: tftp://10.10.10.3/image.txt
MAC ADDRS: 001f.2732.9500
Switch#

Switch#show vstack group built-in 2960g 48 detail
---------------------------------------------
Group Name: 2960G 48
Image Name: tftp://10.10.10.3/c2960-lanbasek9-tar.150-2.SE6.tar
Config file name: tftp://10.10.10.3/2960-48-imagelist.txt

Switch#

Thanks 

[Leo Laohoo]

The client switch is factory default there is no configuration on it.

I need to see what the client switch is doing.

Post the complete output to the command "sh run | i tftp".  

[CartoGraph]

Hello Sirs,

I have a stack with 5 switches (in fact doesnt matter the number).

The command "no vstack" affects somehow the stack?

Thank You!