- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-22-2023 11:19 PM
Need to know what is KVM Switch?
If Cisco Has KVM Switch please share the part number and State the usage of it.
@everyone
Solved! Go to Solution.
- Labels:
-
Other Switching
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-24-2023 04:38 AM - edited 11-24-2023 04:45 AM
Are you referring to Cisco Nexus 1000V Switch for KVM ?
First of all that is not a KVM switch - it is a Nexus switch for KVM and in this case KVM is not Keyboard, Video, Mouse it is Kernel-based Virtual Machine - a virtualisation technology for Linux.
The Nexus 1000V Switch for KVM provides a virtual switch for Linux KVM - in other words it's simply a software component emulating a switch under the KVM Hypervisor.
Note that Nexus 1000V Switch for KVM is end of life - Cisco stopped selling it in 2018 and it goes end of support in a few weeks time (11 Dec 2023).
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-1000v-kvm/eos-eol-notice-c51-741341.html
Reviewing your original question now that we know what you are referring to (it would help everybody if you are very clear what you are asking about - especially with an ambiguous acronym like KVM):
> If Cisco Has KVM Switch please share the part number and State the usage of it.
The answer is no, they do not. They used to have the Nexus product but that is end of life now and there is no direct replacement for it. If you read the EOL notice linked above you'll see:
Product Migration Options
Customers are encouraged to migrate to Cisco Application Centric Infrastructure.
If you're looking for a virtual switch for KVM then take a look at
https://kb.novaordis.com/index.php/KVM_Virtual_Networking_Concepts
https://www.ibm.com/docs/en/linux-on-z?topic=sc-kvm-guest-virtual-network-configuration-using-open-vswitch
https://www.redhat.com/sysadmin/libvirt-open-vswitch
https://wiki.libvirt.org/VirtualNetworking.html
https://computingforgeeks.com/use-open-vswitch-bridge-on-kvm-virtual-machines/
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-22-2023 11:32 PM - edited 11-24-2023 12:06 AM
Helo @subarayarsooper
A KVM switch, which stands for Keyboard, Video, and Mouse switch, is a hardware device that allows a user to control multiple computers or servers using a single set of peripherals (keyboard, video monitor, and mouse). This is particularly useful in situations where you have multiple computers or servers but don't want to have a separate set of peripherals for each one. By using a KVM switch, you can switch between the connected computers easily.
To my knowledge Cisco has never made a KVM Console switch.
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-23-2023 02:35 AM
BTW, the most place I've seen KVMs deployed has been for devices (often servers) in a rack.
Also BTW, some newer technologies have reduced the need/usage of KVMs.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-23-2023 02:47 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-23-2023 10:48 AM
Nexus switches are ethernet LAN switches - nothing to do with KVM.
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-23-2023 03:38 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-23-2023 06:57 PM
What have you got that makes you think that Nexus is/has KVM?
Rick
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-24-2023 04:38 AM - edited 11-24-2023 04:45 AM
Are you referring to Cisco Nexus 1000V Switch for KVM ?
First of all that is not a KVM switch - it is a Nexus switch for KVM and in this case KVM is not Keyboard, Video, Mouse it is Kernel-based Virtual Machine - a virtualisation technology for Linux.
The Nexus 1000V Switch for KVM provides a virtual switch for Linux KVM - in other words it's simply a software component emulating a switch under the KVM Hypervisor.
Note that Nexus 1000V Switch for KVM is end of life - Cisco stopped selling it in 2018 and it goes end of support in a few weeks time (11 Dec 2023).
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-1000v-kvm/eos-eol-notice-c51-741341.html
Reviewing your original question now that we know what you are referring to (it would help everybody if you are very clear what you are asking about - especially with an ambiguous acronym like KVM):
> If Cisco Has KVM Switch please share the part number and State the usage of it.
The answer is no, they do not. They used to have the Nexus product but that is end of life now and there is no direct replacement for it. If you read the EOL notice linked above you'll see:
Product Migration Options
Customers are encouraged to migrate to Cisco Application Centric Infrastructure.
If you're looking for a virtual switch for KVM then take a look at
https://kb.novaordis.com/index.php/KVM_Virtual_Networking_Concepts
https://www.ibm.com/docs/en/linux-on-z?topic=sc-kvm-guest-virtual-network-configuration-using-open-vswitch
https://www.redhat.com/sysadmin/libvirt-open-vswitch
https://wiki.libvirt.org/VirtualNetworking.html
https://computingforgeeks.com/use-open-vswitch-bridge-on-kvm-virtual-machines/
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-24-2023 07:17 AM
@Rich R We have not yet heard from the original poster, but I believe that you have answered my question about what he has that indicates that Cisco has KVM. A set of initials with 2 different meanings. So thank you.
In terms of Keyboard, Video, Mouse I agree that Cisco has not produced a KVM switch. There are several Cisco devices that can be used as terminal servers and their functionality is pretty similar to KVM.
Rick
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-24-2023 07:22 AM
I thought there would be a replacement for that Nexus switch. So that Nexus
switch is not a KVM (Keyboard video Mouse) Switch as you stated.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-24-2023 12:09 AM - edited 11-24-2023 12:11 AM
@Joseph W. Doherty
wrote: Also BTW, some newer technologies have reduced the need/usage of KVMs.
Totally agree! The rise of virtualization technologies allows multiple virtual machines to run on a single physical machine. This reduces the need for physical hardware switches like KVMs, as administrators can manage multiple virtual servers or desktops from a single console. Also with the widespread adoption of cloud computing, many services and applications are now hosted in the cloud. This eliminates the need for local hardware management, as cloud providers often offer web-based interfaces for managing resources.
To my knowledge Cisco has never made a KVM Console switch.
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-24-2023 04:46 AM
Friend'
VM need SW to interconnect between app install in VM'
This SW is called vSwìtch
KVM is term of vSwitch use by vendor.
So if you want to know about kvm switch search about vSwitch and you will get alot of info about it.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-24-2023 07:30 AM
KVM is VM
Nexus 1000V is vSwitch
