12-13-2018 03:17 PM - edited 03-08-2019 04:48 PM
I have video encoders and decoders that I would like to setup for video streaming across Campuses. I currently have a vlan segmented for the video traffic. When testing the traffic doesn't reach the various locations. Everything worked fine when the encoder and decoder were on the same switch. I can ping the default gateway from the switches, but still the signal doesn't reach the other decoders. My setup contains Meraki switches as cores, Cisco 2960x, 3560, and Meraki MS250 access switches. Should I use vlans or multicast to setup video streaming?
12-13-2018 04:25 PM
You would need to set up multicasting and more importantly if you are streaming and wanting endpoints on different subnets (so encoder and decoders on different subnets), you would need igmp configured as well.
12-14-2018 06:26 AM
12-14-2018 05:58 AM
12-14-2018 06:28 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide