05-08-2021 11:58 AM
I have a SM-ES3G-16-P that should have newer software installed if possible for security reasons. I went to the software downloads on cisco.com and I can't find this model in there.
When I do a sh ver, this is what it says it's running:
System image file is "flash:/c3560e-universalk9-mz.122-52.EX1.bin"
Solved! Go to Solution.
05-08-2021 12:41 PM
After I posted this, I was looking to see if there was updated router software as well, and that's where I found it. The switch module software can be found in routers under any of the routers that can use the switch module. For example, for a 2951 they have switch module software in a section underneath the router for the SM-ES3G-16-P, and also the 2G versions of the switch modules.
So if it's a switch module for a router, look under the router's software section to find software for the switch module.
05-08-2021 12:38 PM
Make sure the Switch module you trying to installing what device : (please confirm the model of the device ?)
show version
05-08-2021 12:41 PM
After I posted this, I was looking to see if there was updated router software as well, and that's where I found it. The switch module software can be found in routers under any of the routers that can use the switch module. For example, for a 2951 they have switch module software in a section underneath the router for the SM-ES3G-16-P, and also the 2G versions of the switch modules.
So if it's a switch module for a router, look under the router's software section to find software for the switch module.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide