02-20-2008 11:31 PM - edited 03-05-2019 09:16 PM
Hi All,
We have a 6513 with dual MSFC/Sup720 (12.2(17r)S2) and have ordered a WS-X6724-SFP blade (w DFC3B daughter card). The node runs CatOS.
Were hoping to run voice across one of the links into this card and have run into a possible issue - can anyone confirm if this blade supports ingress prioritization? Unable to find any info on Cisco. Marking/classification isnt an issue.
Many thanks.
Solved! Go to Solution.
02-21-2008 07:23 AM
No, the WS-X6724-SFP blade does not have an ingress priority queue. It does have an egress priority queue.
Here is the QoS structure on that linecard.
Tx-1p3q8T
Rx-1q8T (2q8T when using dCEF)
More information at:
HTH,
__
Edison.
02-21-2008 07:23 AM
No, the WS-X6724-SFP blade does not have an ingress priority queue. It does have an egress priority queue.
Here is the QoS structure on that linecard.
Tx-1p3q8T
Rx-1q8T (2q8T when using dCEF)
More information at:
HTH,
__
Edison.
02-21-2008 05:09 PM
Edison,
Many thanks for your help. Much appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide