cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2466
Views
0
Helpful
4
Replies

WS-X6K-SUP1A-2GE IOS Upgrade

mayurkpatel
Beginner
Beginner

Hi,

I have Cisco 6506 Switch with WS-X6K-SUP1A-2GE sup

Current CatOS is 6.2(2)

I want to intigrate this switch with TACACS server but this CATOS not support for creating local user so need to upgrade CATOS or Cisco IOS

I dont have any idea, what to do?????

Pls Help Me

Mayur

4 Replies 4

glen.grant
VIP Alumni
VIP Alumni

   That box is too old  and out of support .  A sup1A cannot be converted to IOS I don't believe .  Someone correct me if I'm wrong  but don't think Sup1's were ever upgradable , thought it had to be Sup2 or above.   Why do you need a local username and password versus  the normal telnet and enable passwords on catos which it would fall back to if tacacs is not working ?

Ian Jay
Beginner
Beginner

Sup1A should have MSFC1 which can run IOS, follow the steps and make sure you format bootflash at the end:

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml#conv_msfc_1

Its old, but it should still work

/ijay

i have read this document

as per this doc what I understood ?

pls. tell me I am right or wrong

I can run Cisco IOS in both module

1) SUP:WS-X6K-SUP1A-2GE

2) MSFC:WS-F6K-MSFC2

Some Info given below pls. guide..

SH MOD

Mod Slot Ports Module-Type               Model               Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1   1    2     1000BaseX Supervisor      WS-X6K-SUP1A-2GE    yes ok
15  1    1     Multilayer Switch Feature WS-F6K-MSFC2        no  ok
2   2    2     1000BaseX Supervisor      WS-X6K-SUP1A-2GE    yes standby
16  2    1     Multilayer Switch Feature WS-F6K-MSFC2        no  ok
3   3    16    1000BaseX Ethernet        WS-X6416-GBIC       no  ok
Mod Module-Name         Serial-Num
--- ------------------- -----------
1                       SAL0538BVDY
15                      SAL0538C161
2                       SAD050906GZ
16                      SAD050814XN
3                       SAL0540CRWU
Mod MAC-Address(es)                        Hw     Fw         Sw
--- -------------------------------------- ------ ---------- -----------------
1   00-05-5f-2f-c4-b2 to 00-05-5f-2f-c4-b3 7.1    5.3(1)     6.2(2)
    00-05-5f-2f-c4-b0 to 00-05-5f-2f-c4-b1
    00-05-74-1e-67-40 to 00-05-74-1e-6b-3f
15  00-07-85-b1-6f-80 to 00-07-85-b1-6f-bf 1.2    12.1(7a)E1 12.1(7a)E1
2   00-04-c0-f8-b0-e8 to 00-04-c0-f8-b0-e9 7.4    5.3(2)     6.2(2)
    00-04-c0-f8-b0-e6 to 00-04-c0-f8-b0-e7
16  00-05-5e-53-71-40 to 00-05-5e-53-71-7f 1.7    12.1(7a)E1 12.1(7a)E1
3   00-07-4f-6a-0d-00 to 00-07-4f-6a-0d-0f 1.0    5.4(2)     6.2(2)
Mod Sub-Type                Sub-Model           Sub-Serial  Sub-Hw
--- ----------------------- ------------------- ----------- ------
1   L3 Switching Engine     WS-F6K-PFC          SAL0539CA9H 1.1
2   L3 Switching Engine     WS-F6K-PFC          SAD050909YM 1.1

DIR SLOT0

-#- -length- -----date/time------ name
  1  1673992 Jun 18 2004 12:20:00 c6msfc2-boot-mz.121-7.E
  2  8648437 Jun 19 2004 06:44:56 cat6000-sup.6-2-2.bin
6061312 bytes available (10322688 bytes used)

DIR BOOT FLASH

-#- -length- -----date/time------ name
  1  8648437 Oct 17 2001 08:23:38 cat6000-sup.6-2-2.bin
7342216 bytes available (8648568 bytes used)

Which IOS ver. I can use for Same Flash?

Mayur

copy this code to slot0 then issue the following commands.

Login to router mode , change the parameters.

boot system flash bootflash:c6msfc-jsv-mz.121-8b.E9

boot system flash supslot0:c6msfc-jsv-mz.121-8b.E9

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: