Tengo problemas para ingresar al contenido del módulo 2 CCNA v7, es por algún mantenimiento al portal o alguna razón para ello? ya que tengo otros cursos disponibles a los cuales si logro ingresar.
Forum Posts
I did Introduction to networks course and now am doing junior cyber security analyst courses and it has network basics is it a must for me to do it
Im looking for an upto date Cisco Icon library, that contains not only the older PPT icons but also the newer HW such as SD-WAN cEdge, ACI APIC, vEdge etc. Although the icon-library-production-oct2016 library contains a very good quality image of AC...
Hi Team,Recently i bought Cisco Model for control panel. I need 3D model for IEM-3300-14T2S= and IE-3400-8P2S-E in assembled condition add it in control panel and to check fittings and other layout requirements.I am unable to download 3D files from C...
Podem me ajudar a corrigir os problemas e configurar os dois roteadores com as redes descritas no cenário. Redes do roteador A:192.168.10.0/2430.0.0.0/8 Roteador B:30.0.0.0/810.0.0.0/8128.0.0.0/16192.168.1.0/2490.0.0.56/29 Obs.: Todas as redes devem ...
Dear,Could anyone help me to download cisco Virl instead of GNS. Regards,Nafis
how can i get manufacturer authorization form from cisco?
Does Cisco have a Visio Stencil for Catalyst C9300L-48UXG-4X-E ? If so can you please point me to where I can find it. I did not find it under the Catalyst 9K list.
Hi there,I am looking at finding what is the best "simple" way to structure work and especially work/changes brought across a network. A simple way to provide:1) plan structure project/tasks to be completed2) reporting documentation of reverse engine...
Resolved! NCS-57C3 Factory Reset
I was in the process of setting up tacacs+ on my router, and managed to get myself locked out of it. I unplugged it from the internet, and tried to console in with the local admin password, but that is not working as well. I now need to factory res...
I am trying to confirm power requirements for a switch. I have a Cisco C9300L-24T-4G switch. I am running 120VAC power for my power system to the switch/network cabinet. The standard power supply for this switch is 350 watts. The Cisco catalyst 9300 ...
Hello, Would it be possible to have up to date stencils for the Catalyst 8000 series? I think this is becoming quite important, especially since the ISR4000 are now becoming depreceated. I have seen the one available on Products - Visio Stencils - Ci...
Hello All,Sounds like I have broken/bricked UCS C3260 M4 chassis/nodes with firmware upgrade.I did not complete full upgrade and mistakenly rebooted the chassis while BMC and Raid controllers were only updated with ucs-c3260-huu-2.0.13n firmware.Now ...
Hello. It appears that Cisco Packet Tracer can also be made operational on Fedora Linux with the Debian-type installation binary file. Here is presented a methodology in this regard. In home directory, under a common directory, here named cisco, are...
Hello, I would ask you to send me 3D CAD model of the IE-3400H-16FT Switch (STEP model). If there is no CAD model, I would ask you to send me the accurate 2D drawing with mounting holes layout on switch.
