12-03-2011 05:39 PM - edited 03-17-2019 10:39 PM
Can someone point me to a doc on how my CUCM phones can call a Movi Client and vice versa?
thx,
robert
12-06-2011 01:00 AM
Www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.pdf
Sent from Cisco Technical Support iPad App
12-06-2011 04:53 AM
Gilbert,
actually that docuemnt has nothing in regards to having a CUCM registered IP phone being able to call Movi.
If my movi clients all have the SIP URI of firstname.lastname.movi@customer.com, how do I equate that to a dialable digit string from the CUCM side?
rf
12-06-2011 05:29 AM
Hi Rf,
I know that it is still not possible to call a SIP URI from the cucm world but there are a few ways of doing this.
One way of doing it is to use Findme Accounts on the VCS. Create a prefix that would make the dial string point to the sip trunk towards the VCS and there create a transform to cut off the IP address of the sip request and change that into a domainname or cut it all off. create findme accounts that match the dial string and forward it into the SIP uri of the Movi account.
hope that makes things clear ;-) if it doesn't let me know
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide