About the compatibility of tandberg MCU

[wenjxu]

HI:

      I‘d like to find some documents to confirm if MPS 200 is compatible for telepresence endpoint.It has already been EOS.

Best Regards

Wenjie Xu

[ahmashar]

which EOS endpoints are you talking about?

http://www.cisco.com/en/US/docs/telepresence/endpoint/mps/j4/administration_guide/tandberg_mps_administrator_guide_j46.pdf

[wenjxu]

HI Ahmad:

    I mean MPS 200,is it compatible for telepresence endpoints which cisco are selling?

Thank & Regards

Wenjie Xu

[ahmashar]

Hi Wenjie,

of course, it is compatible but specifically what type of endpoints are you talking about? your question is very general and giving a very general answer, yes. MPS is made by Cisco for Cisco's endpoints, however there is "but" and "if", "etc".

regards, Ahmad

[wenjxu]

Hi Ahmad:

      Thank you for your response.I'm not familiar with cisco telepresence.I know tandberg is a part of cisco,but I'm abit confused about the tandberg's products.My partner said he buoght a tandberg MCU (MPS 200) several years ago，and he wanted to buy some new edpoints,and he said MPS 200 has been EOS.So could you please tell me which endpoint can he buy?Could you give me some documents about the campatibility description of tandberg MPS200 and compatible endpoint？

Tanks & Regards

Wenjie Xu

[ahmashar · Accepted solution]

here is some endpoints that you may consider :

EX90, EX60, E20, 1700, C20, C40, C60, C90, SX20, CTS1000, profile52", Jabber/Movi client

[Jens Didriksen · Accepted solution]

Should also seriously consider upgrading the MCU to either a Codian (now rebadged Cisco);

http://www.cisco.com/en/US/products/ps11562/index.html

or a Cisco 5300,

http://www.cisco.com/en/US/products/ps12283/index.html

considering the MPS200 is hopelessly outdated compared to the end-points of today.

/jens

[wenjxu]

Thanks for advance

[wenjxu]

Thanks for advance