01-09-2018 08:50 AM - edited 03-18-2019 01:45 PM
Have a Spark registered SPARKBOARD and I need to have it be able to call customer that is still on H.323 Polycom endpoint. I have tried putting in the IP address and that does not work. Found a doc that indicated that I should be able to type in "ip" and then be prompted for the IP address but that does not seem to work anymore either. Tried h323@<ip address> but that did not work either.
Any solution?
Solved! Go to Solution.
01-09-2018 10:21 AM
Found the following link:
https://collaborationhelp.cisco.com/article/en-us/7ej8gq
No support for anything other than SIP.
01-09-2018 10:21 AM
Found the following link:
https://collaborationhelp.cisco.com/article/en-us/7ej8gq
No support for anything other than SIP.
01-09-2018 03:54 PM
01-09-2018 10:52 AM
Is that Polycom endpoint registering to a gatekeeper? If so, it may support SIP to H.323 interworking.
02-13-2018 11:37 PM
02-13-2018 11:43 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide