Hi, We'll install a TMS and we currently have CUCM, 2 Telepresence servers, Telepresence Conductor, Expressway, Voice gateway with PRI and SX80 and MX700 My though is to add the telepresence conductor only to TMS so it could control the resources f...
Forum Posts
I have an EX 60 and EX 90 VTC suite and the Table Microphone 20. Are there any firmware updates or software updates I can download and apply to the EX 60 to make it compatible with the Table microphone? If not, are there any other parts that I can pu...
It's been a while and I am finally getting back to my original issue with TMS . I am running TMS 15.4.0 on windows 2012. I am also running SQL 2012 on a seperate server. I have over 300 managed and 250 unmanaged systems along with multiple MCU's a...
How can I get a newly created Panel to close once a button press completed. If I touch outside the new panel it disappears but I would like that to happen after the button is selected.
Hello All, I wanted to test streaming on CMS (2.3). Is it possible to use windows server as a streamer or We should have only third party app (V brick)? Nadeem
I'm trying to forbid some probing attacks on a VCS Expressway.The calls come in from unknown@(various IP addresses), and go to either sip:(string of 12-17 numbers)@(ip address of VCS express), or the same thing without the SIP: prefix (as an H323 set...
I have a C60 running TC7.3.4 software and the H323 status shows "Rejected: Registration retries expired". The VCS shows a good registration but the codec will not make a call. Any ideas?
Resolved! Cisco MX800 speaker Tracking issues
Hey All, We have client that we need to assist remotely, so no way of me being in the room. We are experiencing a weird issue with the MX800 Speaker Tracking. Where the camera will point to the floor and not the person actually talking. I found a l...
Affected Telepresence Systems TANDBERG C60TANDBERG 6000MXP First, let me lead with the fact that I am not qualified to be the administrator of our telepresence system, but due to budget cuts and circumstances, that's what I'm doing. Because of this, ...
Hi Cisco Support, My customer's IX5000 unit registered to CUCM. We wanted to pull up the CDR of this unit of 2017. Can you guys advise how to do this please? Thanks, Lixin
Hello support, We are going to upgrade our existing cucm 10.5 to 11.5 , can anyone tell us what is the minimun version of SX series will support with CUCM 11.5 ? As per CSR Matrix its not clear visible on minimum version of SX series.
Resolved! TMS scheduled call to SX20 not working
We have added a New Cisco SX20 to our VC environment, I have also updated the endpoint to the latest software. Current Software: ce 9.1.4 3ae3106 2017-08-30-- TMS Version: 15.3.0 The endpoint is registered to my VCS, I am able to make calls from a...
Resolved! Video Room Licenses on VCS
Hi, My customer uses a VCS to register all his Video Endpoints, I now need to add an MX800 and licenses for it, I know I need to add room registration licenses but can somebody help me understand how to add this? As far as I understand this it is don...
Hi Folks, Is there a way you can open the Webrtc link received in the email invite to open via CMS app? Currently when you click on that link it opens up the chrome or a browser, however I already had meeting app installed. Is there a way we can ...
Hi Guys, My Customer have solution Telepresence and is with follow problem: On intermittent days and times, our TMS has presented the following message during the videoconferences. “Warning Instance: No response from main system – Error: No contact...
| User | Count |
|---|---|
| 3 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
