cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
506
Views
1
Helpful
1
Replies

Cisco Ip camera configuration

Karume
Level 1
Level 1

what is the basic configuration needed to install a cisco camera on a cisco 3850 switch. I guess I also need a display software to go with it. Please help. Thanks

1 Accepted Solution

Accepted Solutions

Hi

 On the switch the config for cameras is basically add vlan on the port. The switch needs to have proper power supply to provide power via PoE. Usually 1100 W power supply is ok.

 For monitoring you may need a DVR gear that will provide you the software to monitor the cameras.

View solution in original post

1 Reply 1

Hi

 On the switch the config for cameras is basically add vlan on the port. The switch needs to have proper power supply to provide power via PoE. Usually 1100 W power supply is ok.

 For monitoring you may need a DVR gear that will provide you the software to monitor the cameras.