Is the Pro Codec more powerful than the Plus Codec? I know the Pro device has more various types of inputs and outputs but is the codec itself more powerful? Is the Pro codec better at encoding and decoding data to/from audio and video?
Is the Pro Codec more powerful than the Plus Codec? I know the Pro device has more various types of inputs and outputs but is the codec itself more powerful? Is the Pro codec better at encoding and decoding data to/from audio and video?
Hello teams, I have a question about the possibility to register the TelePresence IX5000 on expressway, it is possible? Regards
HiIs there a settings to flip the camera on the Cisco Room Kit
Hi there, Looking for more info on these inputs as the seem to be multichannel audio but is it AES, Dante or Analog other twisted pair copper?
CISCO webex CS-CAM PTZ4K= Camera...The box has a serial number printed on it, on the back part of the camera itself you also find a label with the serial number. Upon logging in into the inside(BIOS) of the camera will you find same serial number?
Hello Dears,I need to perform a factory reset on SX80, but I am unable to do so, as this model is different from others. Attached are the relevant files. Can you please provide instructions on how to factory reset this particular model?
Hi, I'm having an issue with an SX80, when the system enters halfwake, any display connected to the DVI port continues to show the white full awake screen, while displays connected to the HDMI ports will correctly change to the black halfwake screen....
Need to set Encryption "ON" vice Best effort on my endpoints. All EPs are on ce10.X and RoomOS ce11.1I have CMS version 3.3.3. All Endpoints and CMS are registered to Exp Core running x14.0.8. All EP's are running H.323 at the moment. When I turn on...
Hi all,So I did a factory reset a SX80. After it re-started, I put an IP on and everything seem to be find. After several minutes, my router was unable to ping the SX80 and the SX80 was unable to ping router. I re-check the IP address and every t...
Hi,I am currently working on connecting our on-premises(CUCM) devices with Control Hub using xAPI and Webex RESTful APIs. I'I'm following instructions on pg 11 of this documentation and here are the steps I have taken so far:1. I created a workspace ...
I am finding the wiring for the new EQ Codec is not documented in much detail - Can anyone point me to the correct place... The mic array install doc suggests a switch but doesn't show all the wiring options.Do I need two switches as per below or can...
Hello everyone.We have started noticing a light blue spot on top of one of the main displays (the one on the left) of our CTS 3210. Whenever we start a point-to-point or multi-point session, the spot will show up and remain there for about 10 minutes...
When I want to access the "Local Device Controls" page, I don't get to any page. Page not found.Are there any special configurations to be made at the network level?My Room Kit is working well in my business. And online on the Control Hub.Thanks for ...
Does anyone have an example of the format of the CSV file for migrating op prem endpoints to control hub using the device connector tool?I did this per the instructions:"To create the file from TMS, export a System Overview report and only select the...
I am about to through out the darn VCS Expressway Running a VCS Expressway Core version 14.0.8.Running a CMS version 3.3.3 This is my issue: I am dialing outbound from my CMS which is on version 3.3.3. The URI it sends is alias @ domain. Example...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-01-2024 12:01 AM | ||
07-30-2024 03:24 PM | ||
07-29-2024 10:10 AM | ||
07-29-2024 12:01 AM | ||
07-24-2024 06:15 PM |