07-08-2017 11:34 AM - edited 03-18-2019 01:16 PM
I have install core,edge and database and need to configure it can any one help me in this regard
07-19-2017 01:14 AM
Hi Prasad,
I have tried but it gives the error port already in use.
07-19-2017 05:48 AM
Hi Guys,
Can any one share the steps how to generate Webbridge URl and certificates.
07-19-2017 06:08 AM
Are u planning to use the web bridge with expressway or vcs ?
07-19-2017 06:11 AM
Hi Prasad,
web bridge with expressway E.
07-19-2017 06:38 AM
Expressway and VCS E is a different component now.
Lets consider you have a expressway so you can refer the bwlo guide.
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-9/CMS-Expressway-Deployment-Guide_X8-9-2.pdf
07-19-2017 07:59 AM
Hi Guys,
For webbridge CA which things are required to share it with client.I mean which configuration is required.
07-19-2017 08:04 AM
please rate the answer regarding the webbridge.
07-19-2017 10:58 AM
Please read the below document for certificate requirement for CMS
http://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingServer/Deployment_Guide/Version-2-0/Certificate-Guidelines-Single-Combined-Server-Deployment.pdf
07-19-2017 06:56 AM
Installing the certificate and private key for webbridge
To support this you need to install public CA signed certificate. This certificate then use by browser to trust the connection with the webbridge. Its considered that you have configured the listen interface and webbridge.
example: webbridge certs webbridge.key webbridge.crt webbridgebundle.crt
SUCCESS: Key and certificate pair match
SUCCESS: Webbridge enabled
If the certificate fails to install, the following error message is displayed: FAILURE: Key and certificate problem: certificate and key do not match FAILURE: Webbridge configuration not complete
07-18-2017 12:46 AM
Hi,
below are few steps to start with.
Restart the core once licence is uploaded.
pki match webadmin.key webadmin.crt
07-13-2017 04:41 AM
Hi Alok,
Not yet. can you please share the step??
07-13-2017 05:12 AM
The evaluation mode warning is because your Call Bridge isn't activated, you need to purchase R-CMS-K9 to get a license to activate the Call Bridge. All CMS components won't work without an activated Call Bridge. When you get the license, and go through to process of claiming the PAK, you'll be asked for the MAC address of the CMS, you'll need to use the MAC of interface a of the VM itself and not of the VM host, use "iface a" command when logged into the MMP to find the MAC address. The same goes for when you're claiming all CMS licenses, use interface a MAC of the CMS VM.
07-10-2017 02:10 AM
Can you be more specific in your request about configuration ? Because from the start to end their is lots of configuration required.
Also its important to know how you are doing it ? Are you going to use Expressway or without it ?
Regards,
Alok
07-10-2017 09:09 AM
Hi Alok,
Thank you for your response.its my first deployment so i need basic to advanced configuration as per below..Yes we use Expressway
1.Any conference in which jabber, web client, SX20 & Aver are present
2.Acano CMS will be integrated with SFB cloud
Really appreciate if you could help me in this regard.
Regards,
Talha
07-10-2017 11:48 AM
Check the CMS configuration guides (link provided in earlier reply) as well as the Cisco Expressway Options with Cisco Meeting Server and/or Microsoft Infrastructure.
The CMS guides cover deployment and configuration of CMS components as well as setting up a dial plan for inbound/outbound dialing. The Expressway guide deals with SfB calling dealing with CMS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide