01-15-2018 12:10 AM - edited 03-18-2019 01:46 PM
hello, I try to install acano server (2.3) with cucm 11.5.1.13902-2, I followed the steps of instalaltions, I'm stuck in the conference Brgide (cucm level), the trunk sip is in FULL SERVICE but the conference not registered.
can you help me please!!!
Solved! Go to Solution.
01-15-2018 12:22 AM
Hi Please refer to the following information
Rendezvous Calls
CUCM need to trust Callbridge Certificate as CUCM-Trust
Call bridge need to trust Callmanger Certificate
Adhoc Calls
CUCM need to trust Webadmin certificate as Tomcat-Trust
CUCM config
upload certificates of CMS:
web certificate as callmanager-trust
upload root ca certificate as callmanager-trust
restart call manager service and tftp service
configure domain and dns on call manager.
set up secure trunk with replace header checked
configure sip trunk
Add CMS in Conference Bridge under Media Resouces
also refer to:
https://www.youtube.com/watch?v=FFcGHWb718c
01-15-2018 12:22 AM
Hi Please refer to the following information
Rendezvous Calls
CUCM need to trust Callbridge Certificate as CUCM-Trust
Call bridge need to trust Callmanger Certificate
Adhoc Calls
CUCM need to trust Webadmin certificate as Tomcat-Trust
CUCM config
upload certificates of CMS:
web certificate as callmanager-trust
upload root ca certificate as callmanager-trust
restart call manager service and tftp service
configure domain and dns on call manager.
set up secure trunk with replace header checked
configure sip trunk
Add CMS in Conference Bridge under Media Resouces
also refer to:
https://www.youtube.com/watch?v=FFcGHWb718c
01-16-2018 01:35 AM
thank you for your answer and your explanation, good answer, it is a problem of certificate.
thanks again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide