03-09-2011 02:40 AM - edited 03-17-2019 10:13 PM
Hi Community,
In the Codec C Series, is possible to connect 2 LCDs simultaneous without dual display licence?
I just need to project the conference in both LCD's.
Best Regards,
Pedro Vasques
03-10-2011 11:51 AM
I just tried it on my C20; the second HDMI port is not active (I don't have the DD option). Doesn't matter if I have xconf video monitors set to single/dual or dualpresentationonly. This doesn't surprise me at all; why would they have an optionkey for it if it worked by default?
(Of course, if you always want the same display in two places, just use a HDMI video splitter).
03-11-2011 02:20 AM
Hi,
In additional to the previous answer, both video ouptuts available on the C40 are enabled by default from software version TC4.x. Without the Dual Display option, you'll get the same content on both screens as desired.
03-11-2011 02:34 AM
Hi All,
Thanks for the information.
Now, my doubt is clear enlightened.
Pedro Vasques
03-12-2011 09:13 AM
On any device, you could always add a HDMI splitter with 1 input and 2 (or more) outputs.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide