cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1697
Views
0
Helpful
2
Replies

Cube Video call hold resume issue

jeroenhermans
Level 5
Level 5

Hi,

I'm setting up a test environment to allw video calls to pass trough a cube.

9951 - cucm - sip trunk - cube - sip trunk - cucm - jabber for windows

I was able to get it to work for both audio and video, but as soon as I put the call on hold and try to resume, the call is dropped.

This is the relevant config :

voice service voip

ip address trusted list

  ipv4 0.0.0.0 0.0.0.0

allow-connections sip to sip

sip

  midcall-signaling passthru

  pass-thru content sdp

!

!

dial-peer voice 1000 voip

description Inter_Customer_Inbound

session protocol sipv2

incoming called-number +4924141250061

dtmf-relay rtp-nte

codec transparent

no vad

!

dial-peer voice 2000 voip

description Inter_Customer_Outbound

preference 1

destination-pattern +4924141250061

session protocol sipv2

session target ipv4:192.168.12.2

dtmf-relay rtp-nte

codec transparent

no vad

!

dial-peer voice 2001 voip

description Inter_Customer_Outbound

preference 2

destination-pattern +4924141250061

session protocol sipv2

session target ipv4:192.168.12.1

dtmf-relay rtp-nte

codec transparent

no vad

!

Attached is a debug of call put on hold and resumed. thanks for your help.

Jeroen                  

2 Replies 2

Fatih Cetin
Level 1
Level 1