TelePresence and Video Infrastructure

Hello, and thanks for any help ahead of time.We would like to move the database on the TMS to an external managed SQL server. The TMS would continue to remain on the same server it is now. Are there any documents outlining how to do this, the order, ...

Is there anyway of extending the time period for the touchpanel automaitc pairing  ( i.e time befoire it has to be repaired)

Hello,On our VCS Control X7.1, I try to create a rule with regex to limit IP range for the communications. For exemple, when I put on regex string, the regex :(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})And, when I do a locate from VCS Control with IP addres...

Dear friend.I have problem with my Codec C20. Can anybody tell me the reason of this issue.My device reboot after the main menu appeared several times when I powered on. . .When I power on the system without Camera, it run normally. I can do everythi...

Hi,Recently facing some problem, where TMS indicate "No http/https response" for all infrastructure and endpoints, and unable to connect to all system, phonebook is unable to push down to endpoints. No upgrade being done, had tried force refresh and ...

I have some new EX60 units that will eventually be connected via the VCS server, but for now they're just sitting around.  I was wondering if it was possible to configure one as a standalone unit to be able to make H.323 video calls.   I may have a n...

I setup our TMS (14.2) using the Cisco redundancy procedure described in the administrators manual.It is sitting behind a load balancer setup in a one-arm mode. So all traffic coming from the endpoints are sNAT with the IP address of the load balance...

Other than bandwidth, are there any restraints/limitations as to how long a video conference could last?

Hello,We recently received a RMA MCU and about to replace the defective unit tomorrow.  I need to know what is the proper procedure to backup and restore configurations for our Codian 4510 MCU?  The MCU is in TMS and reoccuring meetings scheduled on ...

Just a quick one, does sell a premade cable to go between the C60 unit (D9) and the Cisco camera (RJ-45)? And if so what's the part number?Sent from Cisco Technical Support iPhone App

We have a VCS/VCS expressway/TMS already up and running.  Now we want to integrate a MCU and our goal is to integrate Webex/Onetouch 2.0.  What would be the best way to integrate our MCU with our current setup?