02-27-2013 12:18 AM - edited 03-18-2019 12:40 AM
Hi,
How can I define the conference ID used by a Cisco 5300 MCU? It automatically assigns IDs from 400 on for ad-hoc and from 2100 on for reserved conferences and registers them on h.323 and SIP. They are also shown in TMS but are not changeable. Is it possible to assign my own values?
Thanks a lot,
Solved! Go to Solution.
02-27-2013 08:15 PM
Hi Jochen. If you navigate to the mcu in systems navigator, click on settings>edit settings>extended settings, you should see First Meeting ID step. You should be able to change it there. Let us know if this is what your looking for. Thanks.
VR
Patrick
Sent from Cisco Technical Support Android App
02-27-2013 08:15 PM
Hi Jochen. If you navigate to the mcu in systems navigator, click on settings>edit settings>extended settings, you should see First Meeting ID step. You should be able to change it there. Let us know if this is what your looking for. Thanks.
VR
Patrick
Sent from Cisco Technical Support Android App
02-28-2013 12:33 AM
excellent, that did the trick.
thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide