TelePresence and Video Infrastructure

I need to integrate a Digital Video Recorder(any 3rd party) with Cisco SX-20/C-20. Kindly can any one guide me how would we integrate a 3rd party DVR with it and moreover which DVR we should buy(compatible with Cisco SX-20/C-20). Cisco proposes to de...

All,We have a customer that just installed TMS 14.1.1 & TMSXE 3.0.2.  Everything seems to be working fine, except one minor issue.Booking a room generates at least 3 emails per booking One email from the Exchange to accepting the meetingOne email fro...

Hello Together,How do you that or recommendet wayHow is it with the VCS application if you have on a UCS 220 with VMWare vSphere standard licenses in the case of  disaster like HDD failure or whatwever. This means the hard drives go defective ect... ...

                   I just got a call that during a software update they lost connection at 87% on a Tandberg 880 mxp. It now shows a blue screen and they can't remote into via network. (obviously it doesn't have a valid OS)  I am going to the site to...

Hi My multiway is not working, whenever I am pressing the join all calls, it is giving error that Jabber video was not able to transfer the call to the conference and all all parties listen message that you are the first particepant in the call.Kindl...

Hello,The Cisco C60 administrator guide says that it is possible to get HD1080p 30fps quality at 1472 kbps. But I can not see that. I made a point to point connection between two C60s. When I set the camera setting of the C60 to "motion", I see it ca...

Any help is GREATLY appreciated!I'm experiencing some strange behavior in regards to TURN/ICE and Movi/Jabber.First question: Am I correct in my understanding that Public Default Mediatype Canidate only affects users that are logging into the externa...

                   We are going to implement VOIP with Cisco C2960-24PCL and C2960-48PST PoE switches with SPA303G1 phones and a 3rd party PBX system. SPA303 phones are not PoE supported and can only be power on with the power adaptors comes with the...

                   Is there a good doc/ detail on C90 MIC mixer settings? This would be where you want the 8 MICs to mix input during calls from people in the C90 room during TelePresence calls; of course one can set levels, echo cancellation and suc...

Does anyone has instruction or can point me to a document that explains how to configure VCS endpoints to use SRV records.  i configured SRV in DNS to support sip_tcp, sips_tls and sip_tls on port 5061 and configured SIP on endpoints to use URI for r...

HelloDoes anyone know what is the WAN Requirments for EX 60 and EX 90?Including BW, latency, jitter, and Packet loss in simple way?