cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
905
Views
0
Helpful
3
Replies

hwic_t1e1_wic_bp_disconnect: disconnect failed

horance
Level 1
Level 1

Hi , I replace voip router from Cisco 3640 to C2921 router.

The C2921 had show error message.

%FLEXDSPRM-3-TDM_CONNECT: failed to connect voice-port (0/0/0) to dsp_channel(0/0/4)

hwic_t1e1_wic_bp_disconnect: disconnect failed

I found this is a bug.

https://tools.cisco.com/bugsearch/bug/CSCuj64211

Known Fixed Releases:
(4)

15.4(1.3)T

15.4(1.4)T

15.4(1.8)S

15.4(1.9.1)XEB

Those version of IOS images do exist? i cannot find them.

Thanks.

1 Accepted Solution

Accepted Solutions

Hi Horace,

even though15.4.1T1 image uploaded on 2921 router is not deferred but 15.1.4M7 is the latest and suggetsed image with same DRAM and flash requirments.

also DSP firmware 36.1.0 working on your router is above 35.1(2)DSP.Lastly, images available in which problem is fixed are not available for downloading.

you can give a try upgrading the IOS image on router to 15.1.4M7

http://software.cisco.com/download/release.html?mdfid=282774229&flowid=7443&softwareid=280805680&release=15.4.1T1&relind=AVAILABLE&rellifecycle=ED&reltype=latest

regds,

aman

View solution in original post

3 Replies 3

Aman Soi
VIP Alumni
VIP Alumni

Hi Horance,

I think bug talks about DSP firmware.

can you run the command show voice dsp group all /show version and share the output?

regds,

aman

Hi aman,

  Thanks support.

#sh voice dsp group all

DSP groups on slot 0:

dsp 1:

  State: UP, firmware: 36.1.0

  Max signal/voice channel: 32/32

  Max credits: 480, Voice credits: 480, Video credits: 0

  num_of_sig_chnls_allocated: 32

  Transcoding channels allocated: 0

  Group: FLEX_GROUP_VOICE, complexity: FLEX

    Shared credits: 480, reserved credits: 0

    Signaling channels allocated: 32

    Voice channels allocated: 0

    Credits used (rounded-up): 0

  Slot: 0

  Device idx: 0

  PVDM Slot: 0

  Dsp Type: SP2600

dsp 7:

  State: UP, firmware: 36.1.0

  Max signal/voice channel: 32/32

  Max credits: 480, Voice credits: 480, Video credits: 0

  num_of_sig_chnls_allocated: 28

  Transcoding channels allocated: 0

  Group: FLEX_GROUP_VOICE, complexity: FLEX

    Shared credits: 480, reserved credits: 0

    Signaling channels allocated: 28

    Voice channels allocated: 0

    Credits used (rounded-up): 0

  Slot: 0

  Device idx: 0

  PVDM Slot: 1

  Dsp Type: SP2600

router show version:

#sh ver

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(1)T1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2014 by Cisco Systems, Inc.

Compiled Wed 12-Feb-14 04:57 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)

pnc_chungho_voip uptime is 8 minutes

System returned to ROM by reload at 13:02:13 TPE Thu Feb 27 2014

System image file is "flash0:c2900-universalk9-mz.SPA.154-1.T1.bin"

Last reload type: Normal Reload

Last reload reason: Reload Command

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.

Processor board ID FGL175210C8

3 Gigabit Ethernet interfaces

1 terminal line

2 Channelized E1/PRI ports

DRAM configuration is 64 bits wide with parity enabled.

255K bytes of non-volatile configuration memory.

250880K bytes of ATA System CompactFlash 0 (Read/Write)

License Info:

License UDI:

-------------------------------------------------

Device#   PID                   SN

-------------------------------------------------

*1        CISCO2921/K9          FGL175210C8    

Technology Package License Information for Module:'c2900'

------------------------------------------------------------------------

Technology    Technology-package                  Technology-package

              Current              Type           Next reboot 

------------------------------------------------------------------------

ipbase        ipbasek9             Permanent      ipbasek9

security      None                 None           None

uc            uck9                 Permanent      uck9

data          None                 None           None

NtwkEss       None                 None           None

CollabPro     None                 None           None

Configuration register is 0x2102

Regards,

Horace

Hi Horace,

even though15.4.1T1 image uploaded on 2921 router is not deferred but 15.1.4M7 is the latest and suggetsed image with same DRAM and flash requirments.

also DSP firmware 36.1.0 working on your router is above 35.1(2)DSP.Lastly, images available in which problem is fixed are not available for downloading.

you can give a try upgrading the IOS image on router to 15.1.4M7

http://software.cisco.com/download/release.html?mdfid=282774229&flowid=7443&softwareid=280805680&release=15.4.1T1&relind=AVAILABLE&rellifecycle=ED&reltype=latest

regds,

aman