08-25-2014 12:04 PM - edited 03-18-2019 03:19 AM
I have a customer that has a pair of Tandberg Legacy equipment. A Boarder Controller and a Gatekeeper.
Looking for configuration docs for Q5.x and Q6.x for the Boarder Controller and N5.x and 6.x for the Gatekeeper.
can someone point be the way?
Thanks.
Solved! Go to Solution.
08-25-2014 01:37 PM
Tandberg's old FTP site is apparently still available:
http://ftp.tandberg.com/pub/software
The PDFs are in their respective Border Controller and Gatekeeper folders.
Edit: Sorry, those are just Release Notes. A quick Google search for Tandberg Gatekeeper User Manual (or Border Controller) shows a bunch of links of the PDFs in various places around the web.
08-25-2014 07:23 PM
That's correct. Only the Cisco VCSc / VCSe support H323/SIP interworking. The old Tandberg Gatekeeper only supported H323.
08-25-2014 01:37 PM
Tandberg's old FTP site is apparently still available:
http://ftp.tandberg.com/pub/software
The PDFs are in their respective Border Controller and Gatekeeper folders.
Edit: Sorry, those are just Release Notes. A quick Google search for Tandberg Gatekeeper User Manual (or Border Controller) shows a bunch of links of the PDFs in various places around the web.
08-25-2014 05:04 PM
I just googled the documents and downloaded. Have a go. If you're familiar with the VCS you should be able to catch on to how the Gatekeeper with the Border Controller works. PM me if you want the documents I found.
08-25-2014 07:19 PM
Thanks. Was hoping that the 6.x added sip support but it does not look like it.
08-25-2014 07:23 PM
That's correct. Only the Cisco VCSc / VCSe support H323/SIP interworking. The old Tandberg Gatekeeper only supported H323.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide