I'm running debug ccapi non-call on our cubes. I would assume based off documentation, this means options messages would be in the logs without all the invite/ack/bye etc you get from calls. I'm tryin to monitor keepalives that stop working.
Logging level is debugging. I see keepalives when I do debug ccapi messages but I don't want all the garbage from calls in my logs when I'm troubleshooting this. Is this something like a message only shows up in logs from debug ccapi non-call if the keepalive fails?
This is really all there is in docs I've found from Cisco:
SIP Call flows
These debugs are the most commonly used for SIP call flows and they can be enabled inside CUBE and TDM Gateways with a SIP Leg between the Router and CUCM or any other SIP Server/Proxy.
Basic SIP Debugs
debug ccsip messages
debug ccsip error
debug ccsip non-call !Optional, applies for SIP OPTIONS and SIP REGISTER Messages.