07-09-2019 01:37 PM
I understand that in the past you could block incoming calls on H.323 gateways based on the calling number by creating the required translation rules, applying them to a translation profile, and then applying that translation profile to a voice port. Is this no longer supported? If so, what software version was the last to support it? I know we can do this by applying the translation-profile to a dial peer, but really interested in blocking the call on the voice port.
07-09-2019 02:19 PM
It is still supported, you can apply the translation rule under the voice port instead of the dial-peer.
07-11-2019 11:29 PM
Adding to Andres's answer, some more links for reading:
Below are couple of links that explains such blocking at gateway level:
Below link explains blocking at CUCM level:
https://supportforums.cisco.com/document/71966/blocking-calls-based-calling-party-id
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide