Unified Communications Infrastructure

are there commands that can be used in the CUBE to determine if the connection to the service proivder SBC is good?Looking for medica and signaling address related information going to the service provider please.thanks,paul.

After installation of the IM and Presence Server 11.5 I cannot access it through the web browser. When I type in the IP address of my newly configured server it gives me the error "This site can't be reached." I was able to activate all the services ...

One question please, Regarding the USB eToken, I used my PC to install the two USB security Token using the Cisco CTL Client. the question is after installation and everything is ok, I must keep the two USB eToken connected to my pc or the server per...

Ran into a small issue when I asked my network folks to create some Internal DNS SRV records to support my Expressway C setup. Using the Cisco Expressway Basic Configuration Deployment Guide X8-11-4, Appendix 2: DNS Records I pretty much used whats i...

I have a user who would like to have all calls from a specific number go straight to his voicemail. But, only that caller. How can I accomplish this? If the number calls any other phone on the call manager, it should go through.

I have a call handler setup with caller input.  The green instructs them if they would like to leave a voicemail to press 0.  Under the caller input - 0 I have the Call Action set to "Take Message".Is there anyway to record a greeting before the reco...

Hello, we installed 2 IM & presence servers to test Jabber and now we have decided not to use it. I googled how to remove safely those 2 servers but did not find any documentation. Has anybody already done such a thing and could give me some pointers...

Okay, i see where i can add a softkey for malicious. Where do i find this information once softkey is pressed?I have read here that you can do a CCM Trace and find the info. Is that under RTMT/Trace & Log Central/  Then where CDR Files? Call MAnanger...

Hello All,      I have a CUCM Pub and Sub running CUCM 11.1.5.  The cluster is currently in production.  I'am going to be doing Jabber and I have a IM and P server on 11.1.5 already running DNS.  I migrated a cluster to 11.1.5 so It didn't have DNS ...

Hello everyone. I have been looking around SRND but cannot find any information on how to reset the password of a priv 1 admin on CLI. Should I login to the CLI using the priv 1 admin account and reset from there? Running the set password user admin ...