Call filtering based on Calling party on CUCM

[allahverdiyev]

Hello,

I have been searching call blocking features on CUCM based on ANI. I have read many documentations. 

I know the way of implementing "Route next hop by CGNID" in translation pattern. The issue is when I implement the same scenario all calls are blocked. The only difference I see is the gateway; documentation implements it on GW, but I use sip trunk. Could it be issue?

Is it possible to use the same scenario with sip trunk (to CUBE>>ITSP)?

[jonathan.salter]

I found it much cleaner to use translation rules on the router, something like this.

voice translation-rule 10
 rule 1 reject /7024486331/
 rule 2 reject /447759313990/

voice translation-profile call_block
translate calling 10

Then add it to the dial-peers.

[allahverdiyev]

I know that. But I need solution on CUCM. CUBE is controlled by ITSP.

[casey.atkins]

Jonathan, do you have an example to add the translation rule to the dial peers.  I am trying to implement this and cannot get it to block my cell number as a test.  Thank you in advance.

[jonathan.salter · Accepted solution]

Try this...see attached

[allahverdiyev]

Hey man, thanks for the diagram. It seems working now :)
One this I left before was \+! translation pattern.

Regards

[jonathan.salter]

Glad it worked out for you!!