Hi Friend,i don't know how can i shutdown the server meeting place. I try from ssh but i don't find the right command.Is There a method from Web? or what is the method to shutdown this server? thanks for all
I have a general question on SIP integration between CUCM and CUC. I am planning to use "Run on All Active CM Nodes" both on the Route-list and SIP Trunk pointing to the Unity Connection. With this feature I understand that the CUCM local to the call...
Hi,
I am evaluating alternatives to the existing attendant console which we are using now in the European area.
As usual the attendant console is most of the time part of a host of extra tools (Telephone book, reverse lookups, reporting) so any p...
Hi Folks,I meet a problem, for outgoing calls, does Cisco ISR support to choose PRI line based on calling number if customer has over 2 PRIs? dial-peer voice 911 potstranslation-profile outgoing callingnumber1 destination-pattern 911no digit-strippor...
I started the installation and it started fine but there was a problem with the networking. So I Halted the install. Now whenever I restart the VM it comes up to the INSTALLATION FAILED screen and says "The installation has failed and must be resta...
Hi! I would like to ask if there's any way to force a 7940 SIP converted phone(Non-CUCM) to send a Keep-alive or SIP OPTION Message?As we've monitored it only sends REGISTER then, that's all, no OPTIONS/Keepalives from the phone that's why its droppi...
Evening again cisco tech,
Why does cisco make this so complicated.
I have a new challenge
Lost access to CUCM web admin page 7.1 2 days after getting phone configured
I have searched through the current CUCM knowledge articles and found n...
I have one extension to which I am unable to transfer calls from the call handler. It has a mailibox as well. I don't have problem transferring calls to every other extensions. I can call the extension, it works fine. I can call the DID associated wi...
We currently have 2 Leaf North America Clusters and 1 International Leaf Cluster connected via SIP Trunks to a SME Cluster for inter-cluster call routing.. Also we have Expressway C + E connected via SIP trunk to SME that provides B2B Video calls for...
I have installed CUCM 11.5 on VMware 6.5
I am about to install CUC 11.5 on VMware 6.5
However, originally it comes with 60 days of demo.
How to properly ask and obtain additional trial demo for the above applications?
PS. Is Unity Connection Versio...
Hello All,
CUCM: 10.5(2)
We have never used the LDAP Sync/Authentication feature at all with CUCM. We currently have over 200+ end users configured in CUCM locally.
So today, I am testing the LDAP sync features by syncing users from a new OU I ...
Can somebody tell me if I create an advertised pattern to summarize a group of extensions, do I still have to check the "advertise globally via ILS" button under the e.164 alternate number?
I'm having a little trouble regarding out bound calls. The following is what I have on my voice gate-way.
I want the outbound call to use dial-peer 99999400 not 99999402. However, all outbound calls are using 99999402 dial-peer. Any suggestion? L...
