01-03-2011 02:07 PM - edited 03-19-2019 02:09 AM
Where in CCA version 8 can we disable the second call on any extension? Is it possible?
Solved! Go to Solution.
01-04-2011 06:21 AM
Hi William,
Have a look at these 3 good threads that detail this issue.
https://supportforums.cisco.com/message/3246737#3246737
https://supportforums.cisco.com/message/3088569#3088569
https://supportforums.cisco.com/message/3125246#3125246
It looks like you need to use the cli with Huntstop Channel if you
are using Dual Line DN's and the CCA (Busy Trigger = 1) if using
Octo Line DN's
Cheers!
Rob
01-04-2011 06:21 AM
Hi William,
Have a look at these 3 good threads that detail this issue.
https://supportforums.cisco.com/message/3246737#3246737
https://supportforums.cisco.com/message/3088569#3088569
https://supportforums.cisco.com/message/3125246#3125246
It looks like you need to use the cli with Huntstop Channel if you
are using Dual Line DN's and the CCA (Busy Trigger = 1) if using
Octo Line DN's
Cheers!
Rob
03-31-2011 08:28 AM
Hello William,
We've the same problem, did you find a solution, using CCA?
Thanks a lot !
Maarten.
03-31-2011 08:47 AM
Must use CLI
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide