HI
I Have a requirement from my client to use a pin code before dialing the number , i got every thing working with the below configs, my biggest chalange is to
get the fax to work under this configs i have one ATA , currently my fax can receive fax but can't dial out because of the configs below can any suggest a solution to get my fax working with no pin number, i was thinking of using a translation that will be used when you want to fax but my challange again was if people start to know that when the want to fax the Dial 9 and a fax number the can also use that to their phone.
ephone-template 1
softkeys idle Redial Login Cfwdall Pickup Gpickup Dnd
!
telephony-service
after-hours block pattern 1 0
after-hours block pattern 2 1
after-hours day Sun 00:00 23:59
after-hours day Mon 00:00 23:59
after-hours day Tue 00:00 23:59
after-hours day Wed 00:00 23:59
after-hours day Thu 00:00 23:59
after-hours day Fri 00:00 23:59
after-hours day Sat 00:00 23:59
create cnf-files version-stamp 7960 Jun 30 2011 09:17:42
!
!
ephone-template 1
softkeys idle Redial Login Cfwdall Pickup Gpickup Dnd
!
!
ephone-dn 1 dual-line
number 7200
pickup-group 1
label CRIME1
name ACII lucky mashu
allow watch
corlist outgoing call-cell
transfer-mode consult
!
!
ephone 1
device-security-mode none
description mashu lucky
mac-address 2893.FEA3.2BEF
ephone-template 1
type 7911
button 1:1
pin 198320
!
!
ephone-dn 40 dual-line
number 7040
pickup-group 1
name ACII
allow watch
transfer-mode consult
!
!
!
ephone 11
device-security-mode none
description FAx Line
mac-address 3037.A616.1868
max-calls-per-button 2
type ata
button 1:40
!
