Kindly suggest the configuration
We need to monitor the Connectivity with SIP Service provider
The SIP link frequently goes down and we are not getting alerts on CUCM ,Because the SIP trunk from CUCM to CUBE Internal interface
Any suggestion to get alerts when losses Connection to SIP server (10.200.2.90)
CUCM Configuration:
---------------------------------
SIP Trunk in CUCM
Destination IP :10.24.100.10 Port 5060
CUBE Configuration:
---------------------------------
interface GigabitEthernet0/0
description ** CUBE IP **
ip address 10.24.100.10 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1.2382
description ** Connection the ISP **
encapsulation dot1Q 2382
ip address 10.19.10.254 255.255.255.252
!
ip route 0.0.0.0 0.0.0.0 10.222.2.1
ip route 10.200.2.90 255.255.255.255 10.19.10.253
!
dial-peer voice 8 voip
description ** Outbound dailpeer to SIP ISP**
translation-profile outgoing ADDTran
destination-pattern 05........
session protocol sipv2
session target ipv4:10.200.2.90
voice-class codec 1
dtmf-relay rtp-nte
no vad
!
dial-peer voice 2 voip
description ** CUCM dailpeer **
destination-pattern ....
session protocol sipv2
session target ipv4:10.200.8.10
voice-class codec 1
dtmf-relay rtp-nte
no vad
!