04-09-2016 08:06 AM - edited 03-19-2019 10:58 AM
Hi All,
I am facing another issue with CUCM 7.1, i am not able to view the GUI interface.
When i check the service i came to know that Cisco Tomcat service is not starting, Please advice. I have done the below
1) Tried to restart the service through CLI
utils service restart Cisco Tomcat.
2) restarted Server.
3)tried Utils diagnose fix
All above gives me no luck
Best Regards,
Sal
04-09-2016 10:33 AM
I would try to reboot the server using cucm' recovery disk.
Suresh
04-09-2016 10:40 AM
Hi Suresh,
I dont have recovery Disk for CUCM 7.1, is there any source to download from Cisco.
Best Regards,
Salin Subran
04-09-2016 10:59 AM
Yes, you can download from Cisco for exact cucm version..it must be available there. Or provide the complete cucm version here, I will try to provide the link.
Suresh
04-09-2016 11:18 AM
thank you, i dont have any backup.
will this cd will help me to Repair only the DB?
04-09-2016 07:40 PM
This process will not harm anything..but u should have backup in case of anything goes wrong.
Suresh
04-10-2016 07:32 AM
Hi Suresh,
CUCM was not booting from recovery Disk.
But find a solution, we unplugged all the phones and then restarted the CUCM, it worked.
so Some/one of the phones maybe sending bad requests to CUCM.
Even though the issue resolved, i am very keen to know why the CD didnt worked.We tried two different CD and from Different CD drives.Any Suggeston for this.
Best Regards,
Salin Subran
04-10-2016 07:41 AM
[+5] to Suresh for inputs.
You can try inserting into PC /Laptop and check whether your system is booting .
If no, then, there is a problem.
regds,
aman
04-09-2016 11:05 AM
Here you go..
https://software.cisco.com/download/release.html?mdfid=282421166&flowid=77889&softwareid=282074294&release=7.1(5b)&relind=AVAILABLE&rellifecycle=&reltype=latest
Suresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide