Good afternoon
We have a problem after an unexpected hardware shutdown, now when logging into CUCM an error appears "
WARNING: Ungraceful shutdown detected - A rebuild or upgrade of this node may be required to ensure no negative impact
(such as configuration or file system corruption). For instructions, see the installation guide and upgrade guide for this version." I ask for help in solving this problem. Unfortunately, there is no Backup file to restore
This is an enhancement introduced in the latest versions. When CUCM is shut down ungracefully, a warning will be triggered. Versions 12.5.1SU6, 14SU2, and higher have this CLI command by default , which you can use to turn off this warning. If you are on a version below the ones mentioned, you will need to install the COP files “ciscocm.add_utils_ungraceful_warn_disable_v1.0.k4.cop.sha512” on all affected nodes. Doing so will give you the option to disable this warning using the command “CLI Command: utils ungraceful warn disable”.
The recommended option is to ensure your DB is not affected by the ungraceful shutdown and if not affected, turn off the warning using the above command.
You can check the DB using the following commands:
To check integrity:
Database: Use the CLI command ‘show tech dbintegrity’ to check database integrity.
OS: Boot off the recovery.iso and run a file system check to verify OS file system integrity.
