09-22-2011 05:45 PM - edited 03-19-2019 03:39 AM
Hi all,
I tried to install CUCM8 on VMware workstaion7, but failed. It showed " ......the hardware you are using is not supported for this product ...."
( attachment vw error.jpg)
i read some discussions in this community, not sure if it is related to my vitrul machine hardware specification( pls. see attachment vw hw spec. jpg) , the CUCM8 image file, or sth. else.
Hope somebody could help, thanks.
The CUCM8 image file i used is from the following link:
file:
UCSInstall_UCOS_8.0.3.10000-8.sgn.iso_part1of2
UCSInstall_UCOS_8.0.3.10000-8.sgn.iso_part2of2
Howard
09-22-2011 06:59 PM
Hi Howard,
8.0.3 is the only CUCM version I've had issues with loading into Workstation. Use 8.0.(3a)SU2 and you should be fine.
HTH,
Chris
09-23-2011 07:47 AM
Hi Chris,
I tried CUCM 8.0(3a)SU2 and got the exact error message ".... the hardware you are using is not supported for this product ...."
CUCM 8.0(3a)SU2 link:
Any idea? Thanks
09-24-2011 03:58 AM
Hi
I wouldn't normally add two disks - maybe try removing one (leaving the one at SCSI ID 0:0 in place).
Aaron
09-24-2011 03:16 PM
I tried removing the HDD and just left one HDD, still got the same error message.....
My VMware workstaion is running on HP DL360 G3 server, intel CPU, windows 2003. And i successfully installed CUCM7 on it.... It is weird to get that error......
Any thoughts everyone?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide