09-23-2016 12:14 AM - edited 03-19-2019 11:37 AM
Hi,
DX80 device, when i am trying to register it with CUCM, is showing Failed: 485 Ambiguous / Device type mismatch.
If i register it with VCS, it gets registered.
Is there any compatibility issue with CUCM.
Kindly help.
The event log file of DX80 is attached fyr.
Solved! Go to Solution.
10-06-2016 09:09 AM
Sounds as if you didn't upload the required device pack into CUCM, which will add the new "TelePresence DX" devices for DX running on CE software.
09-23-2016 11:47 AM
Alok,
I recommend you also post this to the Cisco Support Community for additional information and feedback.
https://supportforums.cisco.com/
I hope this helps. Thank you for participating in the community.
Kelli Glass
Moderator for Cisco Customer Communities
09-25-2016 11:54 PM
Thanks Kelli.
Regards,
Alok Shukla
Project Engineer / Contact Centre Collaboration
Wipro Limited
10-06-2016 09:09 AM
Sounds as if you didn't upload the required device pack into CUCM, which will add the new "TelePresence DX" devices for DX running on CE software.
05-02-2017 05:56 AM
Thanks Patrick
06-23-2017 12:26 PM
I realized I had selected the "Cisco DX80" phone type. And for the life of me couldn't figure out why it didn't work.
This post made me see there is also a "Cisco TelePresence DX80" and once I re-created the device as that, it all worked.
07-25-2019 04:21 AM
I have System version: 11.5.1.16900-16
I'm offered phone type : DX80 Web Ex instead of Cisco Telepresence DX80
I see Cisco Telepresence DX70, EX60 & EX90 are listed bu I fail to have Cisco Telepresence DX80
IS DX80 Web Ex fine ?
07-26-2019 11:30 AM
StefanT
Where are you seeing that? I am running
06-27-2017 06:45 AM
- You also have to check if the device has already installed the CollaborationEndpoint firmware.
- Plus, since you don't mention the CUCM version, you have to see compatibility issues (if there is the proper device pack loaded on CUCM).
- be sure about the registration settings you apply on the device considering your network (IPs, TFTP, VLAN etc)
(i'm not pretty sure but check if there is anywhere checked the MTP option)
Argyris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide