Expressway 8.11.4 can't access GUI

[etmarcof]

Hello,

I have a cluster of  two Expressways-C / Expressway-E.   I have installed public certificates in all of servers and it seems everything was OK.  But now i tried to access to expressway-c secondary node and i can't access to GUI it appears

 SEC_ERROR_REVOKED_CERTIFICATE

I already contacted CA and they told me that certificate was not revoked . Also from expressway primary node clustering configuration it shows me that the certificate is valid.

What can i do to gain access to GUI? 

I didn't find any command in cli that help with that

Regards

MC

[etmarcof · Accepted solution]

I managed to solve following this

https://www.cisco.com/c/en/us/support/docs/unified-communications/telepresence-video-communication-server-vcs/200628-Recover-VCS-Web-interface-revoked-Cert.html

[privite2024]

i can't access cisco expressway gui

[Roger Kallberg]

Suggest that you create a new post to ask your question as this post is marked as resolved and is 6 years old. It would also be advisable for you to provide a little bit details on your problem than just that you cannot access the webUI.