06-04-2016 04:15 AM - edited 03-19-2019 11:11 AM
Hi guys,
I'm in the process of installing Cisco Unified CME but stucked in the very beginning. Below are the steps I have already taken:
1. Checked CME compatibility matrix. As I have C2800NM-ADVENTERPRISEK9-M version 15.1(4)M10 IOS on my router then CME 8.6 version is compatible.
2. Downloaded cme-151-4Mv1.zip
3. Copied cme-151-4Mv1.zip to TFTP
4. Run archive tar /xtract tftp://192.168.10.2/cme-151-4mv.zip flash:/CME
However, I got:
%Tar checksum error in tftp://192.168.10.2/cme-151-4mv.zip
This is I suppose because I use tar command attribute but my cme file is in zip format. But on Cisco website there is no .tar file for CME 8.6. Also it's not clear what does "CME tar bundle for version 8.6 - cme-151-4Mv1.zip" mean.
Could you please help me with is issue.
06-04-2016 06:06 AM
Just unzip/extract the file in laptop/desktop and copy them to router one by one .
Suresh
06-06-2016 08:06 AM
Adding to Suresh, you can try some third party software out there and convert this whole Zip folder into a TAR and then do it that way. If not this way, then the only solution is to do each and every file individually.
Regards
Deepak
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide