ā05-13-2021 12:07 PM
So I have a SIP trunk created to connect my CUCM environment to a Poly environment. I am using a 10 digit extension, which is a DID number, on the Poly endpoints and have created some route points in CUCM. I am pointing the route points to the SIP trunk. Internally I can dial the number and it does appear to be connected to the Poly end. However, when I call the number from my cell phone I get the message "The number you dialed is not a working number. Please check the number and dial again".
When I use the Directory number analyzer, it looks like it should be routing.
So I'm curious to see if my call from the cell phone is making it to my cube. Any ideas how I can see if it is?
Thank you.
Solved! Go to Solution.
ā05-13-2021 12:26 PM
ā05-13-2021 12:26 PM
Do a debug ccsip message
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide