
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-02-2013 06:35 AM - edited 03-19-2019 06:04 AM
Hi all,
anyone has try the Informacast paging software?
Any suggestions about multicast configurations?
All switches are 3750X + 6509 (in VSS).
Thanks in advance,
Luciano
Solved! Go to Solution.
- Labels:
-
UC Applications
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-28-2019 12:35 PM
Old thread here - but was hoping to get some clarification. I have a small remote site that only needs about 6 overhead speakers. I have no interest in messing with Multicast configuration. Can I do this unicast ? I'm running 11.x CUCM.
TIA,
Amir
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-19-2014 02:16 PM
Hey Luciano, whats going on!
were you able to ever get informacast to start multicasting information on your network. I was trying to do something similar to multicast audio to cisco ip phones on our network but cannot figure out how to assing a multicast address to the paging server. does it come with a multicast address? or did you assign one for your paging server manually so your vlans can join the multicast group? and how were you able to do this? I also have a core(L3), Distribution(MLS) access(L2), and the multicast paging server is attached to the core. All info given is greatly appreciated!!!!
Regards!
Rick
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-06-2013 05:09 PM
I am aware of it being posted anywhere on Cisco, you need to download it from Singlewire website after you register with them, not sure if you need partner and/or customer license ownership to have access to it.
Chris
Sent from Cisco Technical Support iPhone App

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-08-2013 10:48 AM
Hello,
Can we use the paging GW with the Basic version or is Advanced required ?
Thanks,
Jon
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-08-2013 11:03 AM
Not sure 100%, but I don't see why it would not work with the basic. You can contact singlewire as they are very good to work with and will answer this for you.
HTH,
Chris
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-09-2013 05:55 AM
I would guess no, since that requires a SW License plugin on Informacast. But I am not singlewire, and there is a guy from there that offered to asnwer questions here:
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-09-2013 11:28 AM
I just confirmed my guess is correct. Can I give myself 5 points?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-09-2013 01:17 PM
I'll give you five points. Bam!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-09-2013 01:28 PM
I am honored.
The true test of a mans charachter, is how he gives points.
Stay thirsty my friend!
...

- « Previous
-
- 1
- 2
- Next »